SpeedUp FURIOUS is an electronic and smart speed release device that needs no external power.

It is designed for use with OLIEDS, Oli Move Plus, Oli Move Sport e AM80-Atala motors (is an OliEDS) 2017-18-19-20, to circumvent the 25km/h speed limit and allow for an increase in its active assistance up to speeds of over 50km/h by exploiting the excellent OLIEDS motor’s power to the full.

Vedi di più...

SKU N/A Category


What is SpeedUp Furious?

SpeedUp FURIOUS is an electronic and intelligent speed release device that requires no external power supply.

It is designed for OLIEDS, Oli Move Plus, Oli Move Sport and AM80-Atala (is an OliEDS) 2017-18-19-20 to evade the speed block at 25 kmH allowing to increase its active assistance up to speeds of over 50 KmH (info) taking full advantage of the potential of the excellent OLIEDS engine.

Speedup FURIOUS can be mounted very simply by interposing it between the speed sensor and the motor using original connectors that do not alter the characteristics of electrical resistance and water tightness.
It must also be connected to the exit of the lights of which the engine is always fitted. If your ebike mounts headlights that can be activated from the “Lights” button (powered by the ebike battery) this version of Furious CAN be installed but it is also necessary to purchase the “Y” splitter cable (available here) which allows the splitting of the ‘Lights output for connecting the appropriate connector. Once installed, the speed release will be activated simultaneously with the lights.

Once the device has been activated with the ebike lights key, the bicycle tachograph will show half speed and relative data making it possible, by simply multiplying in mind by two, the calculation of the actual speed and kilometers traveled.

Furious for OLIEDS and AM80 is available in only one version:

– on/off light version for OliEDS and AM80: by simply pressing the “LIGHT” button on the Ebike (arrow on the handlebar control), the device is activated and deactivated.


ATTENTION! This device can be installed with the following limitations:
1: It is not suitable for AM80 AGILE engines (available here)


The main features


– Can be assembled/disassembled at any time

– It does not need any destructive modification to the original parts of the bicycle

– Allows you to adjust speed with assistance activated even over 50 kmH (info)

– Installable in a few minutes, ready to use, plug and go

– Suitable for OLIEDS, Oli Move Plus, Oli Move Sport and AM80-Atala engines adopted by many electric bicycle manufacturers

– Activated and deactivated by simply pressing the Ebike lights button (arrow UP)

– It does not need batteries or external power supply.


Ebike with OliEDS or AM-80 engine where the FURIOUS device was successfully installed

(this list is exemplary and not exhaustive)

– Armony Imola
– Armony Sestriere Evo
– Armony Campione Pro
– Olympia E-Country
– Olympia E2
– Sestriere Evo

– MBM Titania
– MBM Maui
– MBM Maui Lady
– MBM Oberon
– MBM Plus Metis
– MBM Metis

– ATALA B-Cross 500
– ATALA B-Cross 400
– ATALA B-Easy S
– ATALA B-Easy

This site uses cookies to enhance your experience. By continuing to the site you accept their use. More info in our cookies policy.     ACCEPT

Once the SpeedUp speed release device has been installed, the electric bicycle, being over the limit of 25 kmH, is equated to a moped and as such, if it circulates in public places, requires the homologation-registration by the Civil Motorization, it is subject to payment of road tax and insurance coverage, must have a license plate, cannot travel on cycle paths and the driver is obliged to drive with a license and must wear a helmet. Furthermore, driving a motor bike equivalent to a moped that does not comply with the aforementioned provisions involves the administrative seizure of the vehicle and fines that vary according to the infringement committed.
The manufacturer of the speed release system accepts no responsibility for any damage caused to the pedal assisted bicycles on which the device is mounted as well as to direct or indirect damage to people or things.
Please note that changing the bicycle invalidates the manufacturer’s warranty.

The operation of the SpeedUp devices is guaranteed for the software versions of the ebikes released up to the date of purchase of the device itself.
If the ebike is subsequently updated with software for which the SpeedUp device has not been tested, it may fail to work and SpeedUp does not respond with the guarantee.
Before updating your engine it is necessary to check the compatibility with your SpeedUp device.

NB: All the brands mentioned on this site are named exclusively to identify the models of engines and bicycles on which our devices are compatible. They are the property of the respective owners and are in no way related to our company.

Use your helmet, save your life!