135,50

SpeedUp RIBELLE is an electronic and smart speed release device that needs no external power.

It is designed for use with Giant Syncdrive Life-Sport-Pro 2017-18-19 motors, to circumvent the 25km/h speed limit and allow for an increase in its active assistance up to speeds that can exceed 60km/h by exploiting the motor’s power to the full.

Vedi di più...

Categories ,


Share

What is SpeedUp RIBELLE?

SpeedUp RIBELLE is an electronic and smart speed release device that needs no external power.

It is designed for use with Giant Syncdrive Life-Sport-Pro 2017-18-19 motors, to circumvent the 25 KmH speed limit and allow for an increase in its active assistance up to speeds that can exceed 60 KmH (info) by exploiting the motor’s power to the full.

SpeedUp REBEL always shows real speed and mileage on models with display Ridecontrol EVO. On models with side control Multi Switch shows the correct speed data if you connect your smartphone (Giant Ride control App).

SpeedUp RIBELLE is equipped with a self-learning system to store all the parameters of the ebike on which it is mounted. Therefore no setting is necessary. Only a short initial sequence and then you can only think about having fun!

Speedup RIBELLE is assembled in a very simple way interposing it between the speed sensor and the motor and between the Display and the motor using original connectors that do not alter the characteristics of electrical resistance and watertightness.

The operation system starts operating only when the 16 kmH is reached, progressively reducing with a particular algorithm the communication of the wheel revolutions to the engine without the cyclist noticing any difference in assistance. It does not intervene in any way at low speeds. This is an important precaution designed not to vary the parameters of the engine intervention at the restart and in important climbs, (which are the critical and most delicate moments for an engine) thus leaving intact the parameters studied and optimized by the manufacturer, and thus avoiding loss of power, failures or “hiccup” operations that instead occur with the release systems of other manufacturers.

SpeedUp RIBELLE can be activated and deactivated with a sequence of keys (see here). A feedback is shown on the display, if present, each time the activation or deactivation status is changed.

RIBELLE allows the millimetric setting of the wheel circumference starting from 20″ for a very precise calculation of speed and distance even if you had to replace the tire with one of different section from the original. Normally this possibility is not offered by the original Giant system.

 

The main features

– Totally INVISIBLE

– Shows real speed and mileage on models with display. On models with side control Multi Switch shows the correct speed data if you connect your smartphone (Giant Ride control App).

– It can be dismantled and reassembled at any time

– It does not need any destructive modification to the original parts of the bicycle

– It allows to reach speeds with assistance activated even over 50 kmH (info)

– Installable in a few minutes, ready to use, plug and go!

– Suitable for Giant Syncdrive Life-Sport-Pro 2017-18-19

– Activated and deactivated with a sequence of keys (see here)

– Auto-learns the parameters of the ebike, memorizes and maintains the desired settings

– Internal firmware upgradeable to any new algorithms developed by the SpeedUp team. (It is necessary to send the device)

 

Assembly and Use Instructions

Wiring diagram Ribelle for Giant 2017-18-19

 

Video Assembly Instructions

 


This site uses cookies to enhance your experience. By continuing to the site you accept their use. More info in our cookies policy.     ACCEPT

ATTENTION, IMPORTANT NOTICE
Once the SpeedUp speed release device has been installed, the electric bicycle, being over the limit of 25 kmH, is equated to a moped and as such, if it circulates in public places, requires the homologation-registration by the Civil Motorization, it is subject to payment of road tax and insurance coverage, must have a license plate, cannot travel on cycle paths and the driver is obliged to drive with a license and must wear a helmet. Furthermore, driving a motor bike equivalent to a moped that does not comply with the aforementioned provisions involves the administrative seizure of the vehicle and fines that vary according to the infringement committed.
The manufacturer of the speed release system accepts no responsibility for any damage caused to the pedal assisted bicycles on which the device is mounted as well as to direct or indirect damage to people or things.
Please note that changing the bicycle invalidates the manufacturer’s warranty.

EBIKE SOFTWARE COMPATIBLE WITH SPEEDUP DEVICES
The operation of the SpeedUp devices is guaranteed for the software versions of the ebikes released up to the date of purchase of the device itself.
If the ebike is subsequently updated with software for which the SpeedUp device has not been tested, it may fail to work and SpeedUp does not respond with the guarantee.
Before updating your engine it is necessary to check the compatibility with your SpeedUp device.

NB: All the brands mentioned on this site are named exclusively to identify the models of engines and bicycles on which our devices are compatible. They are the property of the respective owners and are in no way related to our company.

Use your helmet, save your life!

Contact